Handset - Cisco Unified IP Phone 8941 Administration Manual

Handset

Procedure
Step 1 Insert the curved connectors into the lower slots.
Step 2
Lift the footstand until the connectors snap into the upper slots.
Note
Handset
The Cisco Unified IP Phone uses a handset that is designed especially for the phone. The handset includes a
light strip to indicate incoming calls and voice messages waiting.
To connect a handset to the Cisco Unified IP Phone, plug the cable into the handset and into the Handset port
on the back of the phone.
Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 10.0
(SCCP and SIP)
62
Connecting and disconnecting the footstand may require a little more force than you
expect.