Wireless Headset Using Headset Port - Cisco Unified IP Phone 8941 Administration Manual

For unified communications manager 10.0 (sccp and sip)

Table of Contents

Procedure

Step 1

In Cisco Unified Communications Manager Administration, choose Device > Phone.

Step 2

Locate the phone you want to modify, and go to the Phone Configuration window for that phone.

Step 3

In the Phone Configuration window, select Enable for the Bluetooth setting and Handsfree for the Bluetooth

Profiles setting.

Step 4

Save your changes.

Wireless Headset Using Headset Port

The phone supports a wireless analog headset. To use a wireless headset, users connect a base station to the

headset port. The base station communicates with the wireless headset.

The Electronic Hookswitch feature enables users to remotely control basic IP phone functionality from the

wireless headset. Basic IP phone functionality includes off-hook and on-hook, ring indication, audio volume

control, and mute.

The Electronic Hookswitch feature supports the following headset devices:

• Plantronics

◦ Savi and CS5xx series with cable APC-82

For more information about wireless headsets that work in conjunction with the Electronic Hookswitch feature,

go to the following URL:

http://www.cisco.com/en/US/prod/voicesw/ucphone_headsets.html

Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 10.0 (SCCP

Headsets

and SIP)

Table of Contents

Show Quick Links

Table of Contents

Unified ip phone 8945