Enable Device Invoked Recording; Enable Blf For Call Lists - Cisco Unified IP Phone 8941 Administration Manual

Procedure
Step 1 In Cisco Unified Communications Manager Administration, select Device > Phone.
Step 2 Locate the phone to be configured.
Step 3 Set the following parameters.
• Do Not Disturb: This check box allows you to enable DND on the phone.
• DND Option: Ring Off, Call Reject, or Use Common Phone Profile Setting.
• DND Incoming Call Alert: Choose the type of alert, if any, to play on a phone for incoming calls when
Step 4 Select Save.

Enable Device Invoked Recording

Configure the Device Invoked Recording feature from Cisco Unified Communications Manager Administration.
For more information and detailed instructions, see the "Monitoring and Recording" chapter in the Cisco
Unified Communications Manager Features and Services Guide.
Procedure
Step 1
Set the IP phone Built In Bridge to On.
Step 2 Set Recording Option to Selective Call Recording Enabled.
Step 3 Select the appropriate Recording Profile.

Enable BLF for Call Lists

Procedure
Step 1 In the Cisco Unified Communications Manager Administration, select System > Enterprise Parameters.
Step 2 From the BLF for Call Lists drop-down list box, choose the applicable profile.
By default, the feature is disabled.
Parameters that you set in the Product Specific Configuration area may also appear in the Device Configuration
window for various devices and in the Enterprise Phone Configuration window. If you set these same parameters
in these other windows as well, the setting that takes precedence is determined in the following order:
DND is active.
This parameter is located on in the Common Phone Profile window and the Phone Configuration
Note
window. The Phone Configuration window value takes precedence.
Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 10.0 (SCCP

Enable Device Invoked Recording

and SIP)
125