Cisco Unified IP Phone 8941 Administration Manual page 132

Set Up Softkey Template
Cisco Unified IP Phones do not support feature control policy configuration settings. The following table lists
the features, softkeys that can be configured on a softkey template, and identifies whether it is supported on
the Cisco Unified IP Phones.
Cisco Unified Communications Manager allows you to configure any softkey in a softkey template, but
Note
unsupported softkeys do not display on the phone.
Table 16: Configurable Softkeys
Feature
Answer
Call Back
Call Forward All
Call Park
Call Pickup
cBarge
Conference
Conference List
Divert
Do Not Disturb
End Call
Group Pickup
Hold
Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 10.0
(SCCP and SIP)
118
Configurable softkeys in Supported as a
the Softkey Template softkey on Cisco
configuration Unified IP Phone 8941
and 8945
Answer (Answer) Yes
Call Back (CallBack) Yes
Forward All (cfwdAll) Yes
Call Park (Park) Yes
Pick Up (Pickup) Yes
Conference Barge Yes
(cBarge)
Conference (Confrn) Yes
Conference List Yes
(ConfList)
Immediate Divert Yes
(iDivert)
Toggle Do Not Disturb Yes
(DND)
End Call (EndCall) Yes
Group Pick UP Yes
(GPickUp)
Hold (Hold) No
Notes
—
—
Phone displays Fwd ALL or Fwd Off.
—
—
Configure cBarge as a programmable
line button or as a softkey.
Conference is a dedicated button.
Only exists on video call.
Phone displays Detail.
Phone displays Divert.
Configure Do Not Disturb as a
programmable line button or as a
softkey.
Phone displays Cancel if the call is not
answered.
—
Hold is a dedicated button.