Set Up Phone Minimum Ring Volume; Set Up Video Capability - Cisco Unified IP Phone 8941 Administration Manual

For unified communications manager 10.0 (sccp and sip)

Table of Contents

Set Up Phone Minimum Ring Volume

The minimum ring volume is set to 0 (silent) for each phone by default.

Procedure

Step 1

In Cisco Unified Communications Manager Administration, choose Device > Phone.

Step 2

Find a phone from the list of phones.

Step 3

Select Minimum Ring Volume.

Step 4

Choose a value between 0 and 15.

Step 5

Click Save.

Set Up Video Capability

The Video Through PC support feature enables the user to send or receive video on the computer when the

computer is connected to a phone. For more information, see the Cisco Unified Communications Manager

Administration Guide.

By default, the Video through computer option is disabled.

Note

The user can enable or disable the Video through computer option in the Preferences menu. If the Video on

PC option is enabled and:

• Video Capability enabled: video is received and shown on the PC display while audio remains on the

• Video Capability disabled: video is not displayed either on the phone or on the PC.

The feature is dependent on SCCP or SIP protocols. IP Phones that use SIP firmware can receive video without

sending video; IP phones that use SCCP firmware cannot receive and send video independently.

The phone must be physically connected to the first network interface card (NIC1) in the PC.

Note

This feature works with products such as Cisco Jabber.

Procedure

Step 1

In Cisco Unified Communications Manager Administration, choose Device > Phone.

Step 2

Enable the Video Capability option.

phone.

Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 10.0 (SCCP