Access Phone Administration Web Page; Set Up The Phone With The Administration Web Page - Cisco 8821 Administration Manual

Access Phone Administration Web Page

Before You Begin
Decide on a password before you enable the administration web page. The password can be any combination
of letters or numbers, but it must be between 8 and 127 characters in length.
Your username is permanently set to admin.
Procedure
Step 1 From the Cisco Unified Communications Manager Administration, select Device > Phone.
Step 2 Locate your phone.
Step 3 In the Product Specific Configuration Layout, set the Web Admin parameter to Enable.
Step 4
In the Admin Password field, enter a password.
Step 5 Select Save and click OK.
Step 6 Select Apply Config and click OK.
Step 7 Restart the phone.
Access Phone Administration Web Page
When you want to access the administration web pages, you need to specify the administration port.
Procedure
Step 1 Obtain the IP address of the phone:
• In Cisco Unified Communications Manager Administration, select Device > Phone, and locate the
• On the phone, access the Settings app, choose Phone Information > Network > IPv4, and then scroll
Step 2
Open a web browser and enter the following URL, where IP_address is the IP address of the Cisco IP Phone:
https://<IP_address>:8443
Step 3 Enter the password in the Password field.
Step 4
Click Submit.

Set Up the Phone with the Administration Web Page

You can set the phone parameters from the Administration web page if you need to set up the phone remotely.
When you set up the phone this way, you set up the first WLAN profile for the phone.
Cisco Wireless IP Phone 8821 and 8821-EX Administration Guide for Cisco Unified Communications Manager
70
phone. Phones that register with Cisco Unified Communications Manager display the IP address on the
Find and List Phones window and at the top of the Phone Configuration window.
to the IP address field.
Configuration on the Phone