Control Phone Web Page Access; Ucr 2008 Setup - Cisco 7821 Administration Manual

The Disabled option is selected by default.
Step 3
Click Save.

Control Phone Web Page Access

For security purposes, access to the phone web pages is disabled by default. This practice prevents access to
the phone web pages and the Cisco Unified Communications Self Care Portal.
Note Some features, such as Cisco Quality Report Tool, do not function properly without access to the phone
web pages. Disabling web access also affects any serviceability application that relies on web access, such
as CiscoWorks.
Procedure
Step 1 In Cisco Unified Communications Manager Administration, choose Device > Phone.
Step 2 Specify the criteria to find the phone and select Find, or select Find to display a list of all phones.
Step 3 Select the device name to open the Phone Configuration window for the device.
Step 4
Scroll to the Product Specific Configuration area.
Step 5 To enable access, from the Web Access drop-down list, choose Enabled.
Step 6 To disable access, from the Web Access drop-down list, choose Disabled.
Step 7 Select Apply Config.

UCR 2008 Setup

The parameters that support UCR 2008 reside in Cisco Unified Communications Manager Administration.
The following table describes the parameters and indicates the path to change the setting.
Table 15: UCR 2008 Parameter Location
Parameter
FIPS Mode
SSH Access
Web Access
Administration path
Device > Device Settings > Common Phone Profile
System > Enterprise Phone Configuration
Device > Phone
Device > Device Settings > Common Phone Profile
Device > Phone
Cisco IP Phone 7821, 7841, and 7861 Administration Guide for Cisco Unified Communications Manager 10.0 (SIP)
Control Phone Web Page Access
129