Control Circuit - Kollmorgen SERVOSTAR 300 Instruction Manual

S300 Instructions Manual | 7 Technical description

7.9.8.2 Control circuit

The example shows a circuit diagram with two separated work areas connected to one emer-
gency stop circuit. For each work area individually "safe stop" of the drives is switched by a
protective screen.
The safety switch gears used in the example are manufactured by Pilz and fulfill at least the
PL d acc. to ISO 13849-1. Further information to the safety switch gears is available from
Pilz. The use of safety switch gears of other manufacturers is possible, if these also fulfill the
SIL CL 2 according to IEC 62061 and PL d according to ISO 13849-1.
Consider the wiring instructions (➜ # 40).
42 Kollmorgen | kdn.kollmorgen.com | May 2020