Expansions; Guide To Installation Of Expansion Cards - Kollmorgen SERVOSTAR 300 Instruction Manual

11 Expansions

Information about availability and order numbers see (➜ # 137).
Expansions cards can only be built into amplifiers without option -FN or -EC!

11.1 Guide to installation of expansion cards

Before you start working, safely disconnect the device from any voltage, that means neither
the electrical power supply nor the 24 V auxiliary voltage of the servo amplifier nor the supply
voltages of any other connected equipment is switched on.
Use a suitable screwdriver to lever off the cover of the option slot.
Take care that no small items (such as screws) fall into the open option slot.
Lever off the small metall sheet and push it back to the small slot. Dispose the big metall
sheet.
Push the expansion card carefully into the provided guide rails of the main slot, without twist-
ing it.
Press the expansion card firmly into the slot.
Screw the screws on the front cover into the threads in the fixing lugs. This ensures that the
connectors make good contact.
S300 Instructions Manual | 11 Expansions
Kollmorgen | kdn.kollmorgen.com | May 2020 115