11.3 Expansion card -PROFIBUS-
This section describes the PROFIBUS expansion card for the S300. Information on the
range of functions and the software protocol can be found in our manual "Communication Pro-
file PROFIBUS DP".
The PROFIBUS expansion card has two 9-pin SubD sockets wired in parallel.
The supply voltage for the expansion card is provided by the servo amplifier.
11.3.1 Connection technology
Cable selection, cable routing, shielding, bus connector, bus termination and transmission
times are all described in the "Installation Guidelines for PROFIBUS-DP/FMS" from PNO,
the PROFIBUS User Organization.
11.3.2 Connection diagram
S300 Instructions Manual | 11 Expansions
Kollmorgen | kdn.kollmorgen.com | May 2020
119