Table 15-38 Configurations Of Dip Switch Sw4 On The Opcom3500E-120Fe× 4-Ge - Raisecom iTN2100 Hardware Description

Raisecom
iTN2100 (P100R002) Hardware Description
SW3
DIP
bit
Bit8
By default, SW3 is all OFF.
Table 15-38 Configurations of DIP switch SW4 on the OPCOM3500E-120FE× 4-GE
SW4
DIP bit
Bit1
Bit2
Bit3
Bit4
Bit5
Bit6
Function Status
Set the egress ON
interface of
aggregated
Ethernet
services.
OFF
Function
Set E1 local or
remote loopback on
optical interface A.
Enable or disable
E1 1–4 loopback on
optical interface A.
Set E1 local or
remote loopback on
optical interface B.
Enable or disable
E1 1–4 loopback on
optical interface B.
Set E1 local or
remote loopback on
optical interface C.
Enable or disable
E1 1–4 loopback on
optical interface C.
Raisecom Technology Co., Ltd.
Description
Set the egress interface of
aggregated Ethernet
services to the FX interface
on the backplane.
Set the egress interface of
aggregated Ethernet
services to the GE interface
on the front plane.
Status
ON Set E1 local loopback on optical interface A.
OFF Set E1 remote loopback on optical interface
A.
Enable E1 1–4 tributary loopback on optical
ON
interface A.
OFF Disable E1 1–4 tributary loopback on optical
interface A.
ON Set E1 local loopback on optical interface B.
OFF Set E1 remote loopback on optical interface
B.
Enable E1 1–4 tributary loopback on optical
ON
interface B.
OFF Disable E1 1–4 tributary loopback on optical
interface B.
ON Set E1 local loopback on optical interface C.
OFF Set E1 remote loopback on optical interface
C.
Enable E1 1–4 tributary loopback on optical
ON
interface C.
OFF Disable E1 1–4 tributary loopback on optical
interface C.
15 PDH and RCMS cards
Description
–
Description
167