Page 1
ISCOM2828F Hardware Installation User Manual...
Page 2
Raisecom Technology Co., Ltd shall not be held liable for errors contained herein or direct, indirect, special, incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Page 3
Tel: +86-10-82883305 Fax: +86-10-82883056 World Wide Web You can access the most current Raisecom product information on the World Wide Web at the following URL: http://www.raisecom.com Feedback Comments and questions about how the ISCOM2828F device works are welcomed. Please review...
Page 5
Preface About This Manual This manual is for users of ISCOM2828F switch with hardware version higher than VER. A.00. Who Should Read This Manual This manual is a reference for device installation and maintenance staff. Relevant Manuals 《ISCOM2828F Series Switches Commands Notebook》...
User Manual General Safety Instructions The following instructions serve as a general guide for the safe installation and operation of telecommunications products. Additional instructions, if applicable, are included inside the manual. Safety Symbols This symbol may appear on the equipment or in the text. It indicates potential safety hazards regarding product operation or maintenance to operator or service personnel.
Page 7
User Manual be present inside certain products even when the power switch (if installed) is in the OFF position or a fuse is blown. For DC-powered products, although the voltages levels are usually not hazardous, energy hazards may still exist.
Chapter 1 Overview 1.1 Overview of this manual This manual mainly discusses the installation of ISCOM2828F switch. It describes the features of the switch, introduces its components and the functions these components accomplish. The manual brings forth a normative installation procedure for users and explains the types and specifications of all cables applied during the installation.
Chapter 2 Specification and Dimension 2.1 Device hardware description ISCOM2828F Ethernet Switch is a layer-2 Ethernet switch designed for network users’ access to the carriers’ network. ISCOM2828F provides 24 100BASE-FX Ethernet interfaces in the form of SFP, 2 1000BASE-X Ethernet interface in the form of SFP and 2 1000BASE-T Ethernet interface in the form of RJ-45.
3.1 Device front panel description 24 100M Ethernet SFP interfaces, 2 1000M Ethernet SFP interfaces, 2 1000M Ethernet RJ-45 interfaces and dozens of status indicators are placed on the front panel of ISCOM2828F switch (see the figure below). In the figure shown above: ①...
Page 11
User Manual Indicator Color Status Description LNK/ACT Green The corresponding port is in Link Up status. Flickering The corresponding port is transmitting or receiving data. The corresponding port is in Link Down status. 1000M Green The corresponding port is connecting to the Ethernet at the rate of 1000Mbps.
User Manual 3.2 Device rear panel description ISCOM2852 can provide a socket for 220V AC power supply or a socket for -48V DC power supply on its rear panel (see the figure below). Users can choose either of them according to need.
4.1 Device model The device models currently provided are: Product Model Description ISCOM2828F/AC All-optical layer-2 switch with 24 100M SFP optical interfaces and 4 1000M uplink interfaces, adopting 220V AC power supply. ISCOM2828F/DC All-optical layer-2 switch with 24 100M SFP optical interfaces and 4 1000M uplink interfaces, adopting -48V DC power supply.
4.2 Device installation 4.2.1 Environment requirement There are heat exhaust outlets on both sides of ISCOM2828F switch. Please leave space on both sides of the switch to keep air flow unblocked. Please make sure the outlets are not blocked. 4.2.2 Install the device on to a rack To set the switch firmly into a rack, please fix the installation tray to the switch using the four screws come with the device and fasten the installation handle on to the rack.
Page 15
Function Type Number Number 3) CONSOLE interface connecting pattern and parameter setup The connecting of ISCOM2828F CONSOLE interface and PC serial port is shown in the figure below. 4、5 PC Serial Pot CONSOLE The values of the connecting parameters of the terminal simulation program on the PC are as...
Ethernet electrical interfaces on other devices with either straight-through or crossover cable. 4.3.3 Connect to the power supply ISCOM2828F/AC adopts 220V AC power supply. Please connect the socket on the rear panel of the switch with 220V AC power supply using the provided power supply cable. Users can use the 2 power supplies, or use only one of them.
User Manual definitions of the switch” in section 4.3.1. 1) Straight through cable (The straight through cable for 100M or 1000M are identical.) Side 1 Side 1 Side 2 3 5 7 1 = White/Orange 1 = White/Orange 2 = Orange...
Page 18
User Manual operate over the switch will appear on the PC (For details, please refer to the corresponding software configuration manual.).
User Manual Chapter 5 Notes The installation, maintenance, plugging in and pulling out of components of ISCOM2828F switch can only be conducted by qualified technical support staff. Please place the device in a temperature-controllable and humidity-controllable room and please be cautious of the conductivity of the materials around the device.
Page 20
Address: 2 Floor, South Building of Rainbow Plaza, No.11 Shangdi Information Road, Haidian District, Beijing Postcode: 100085 Tel: +86-10-82883305 Fax: +86-10-82883056 Email: export@raisecom.com http://www.raisecom.com...