System Configurations; Physical Parameters; Table 1-1 Physical Parameters - Raisecom Gazelle S2028i Manual

Raisecom
Gazelle ST2028i (A) Hardware Description

1.2 System configurations

Adopting industrial-level chip and power module, the Gazelle S2028i supports configurable
interfaces, flexible power supply and networking modes, thus meeting special requirements of
on-site industrial environment.







1.3 Physical parameters

Table 1-1 lists physical parameters of the Gazelle S2028i.

Table 1-1 Physical parameters

Dimensions (Width × Depth × Height)
Power consumption
Weight
Protection level
Operating temperature
Storage temperature
Operating humidity
Power
Provide density of up to 20+4 interfaces, and support the 0.5U subcard in the upper and
lower parts.
Provide multiple service interface types, such as RJ45, 1×9 SC/PC, 1×9 ST/PC, and SFP.
Support the RJ45 serial interface card. Support RS-232/RS-422/RS-485 standards.
Support the GPS card and the PTP card.
Provide the RJ45 Console interface for local management.
Provide Phoenix terminal alarm output interface (ALM) and power interface.
Parameter
DC power Rated voltage
Voltage range
AC power Rated voltage
Voltage range
Frequency
–
Overload protection
Reverse connection
protection
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Value
440 mm × 360 mm × 44 mm

In all-optical interface
configuration: < 43 W
 In all-electrical interface
configuration: < 30 W
7 kg
IP 40
-40 to 85°C
-40 to 85°C
5%–95% RH (non-condensing)
24/48 VDC
20–72 VDC

110/220 VAC
 110/220 VDC
 85–264 VAC
 88–300 VDC
50/60 Hz
Supported
Supported
1 Overview
2