Alarms; Specifications; Table 13-40 Alarms Of The Opcom3500E-Ht-6Fe24E1; Table 13-41 Specifications Of The Opcom3500E-Ht-6Fe24E1 - Raisecom iTN2100 Hardware Description

Raisecom
iTN2100 (P100R002) Hardware Description
Interface
LNK/ACT
(1–6)

13.8.5 Alarms

Table 13-40 lists alarms of the OPCOM3500E-HT-6FE24E1.

Table 13-40 Alarms of the OPCOM3500E-HT-6FE24E1

E1 AIS alarm
E1 LOF alarm
E1 CRC alarm
E1 GID ERROR alarm
E1 remote loopback alarm
Ethernet interface link down
alarms

13.8.6 Specifications

Table 13-41 lists specifications of the OPCOM3500E-HT-6FE24E1.

Table 13-41 Specifications of the OPCOM3500E-HT-6FE24E1

Dimensions
Weight
Max. power consumption
Status
Green Link working LED
 Green: the link interface is properly connected.

Off: the link interface improperly connected or disconnected.
 Blinking green: the link interface is receiving or sending data.
Alarm
Parameter
25 mm (width) × 232 mm (depth) × 240 mm (height)
0.45 kg
12 W
Raisecom Technology Co., Ltd.
Description
Cause
E1 signals are composed of "1" only,
because transmission fails or the peer
device outputs AIS signals.
The output data of uplink devices is
incorrect, because services are improperly
configured or hardware fails.
Data error occurs in transmission.
Reverse duplexing is improperly
configured.
The remote device managed by the card
generates loopback alarms.
Alarms are generated due to Ethernet
interface link failure.
Value
13 EOP cards
Level
Critical
Critical
Critical
Critical
Critical
Critical
110