Raisecom
ISCOM5508 (B) Hardware Description
Table 2-4 Parameters of the Console interface
Connector
Working mode
Electrical features
Baud rate
Data bit
Parity check
Stop bit
Flow control
Cable specifications
Table 2-5 lists parameters of the SNMP interface.
Table 2-5 Parameters of the SNMP interface
Connector
Interface rate
Wiring
Compliant standard
Table 2-6 lists parameters of the GE interface.
Table 2-6 Parameters of the GE interface based on 10/100/1000BASE-T standard
Connector
Working mode
Cable specifications
Compliant standard
Supported network protocol
Parameter
RJ45
Duplex UART
RS-232
9600 Baud
8
None
1
None
8-core shielded cable
Parameter
RJ45
10/100BASE-T auto-negotiation
Support straight-through and crossover cable self-adaption in host
mode
IEEE 802.3
Parameter
Raisecom Technology Co., Ltd.
Description
Description
RJ45
10/100/1000 Mbit/s auto-negotiation
Full duplex and half duplex auto-negotiation
When the working mode is 10 Mbit/s or 100 Mbit/s, we
recommend using the Cat 5 UTP cable.
When the working mode is 1000 Mbit/s, we recommend
using Cat 5 better STP cable.
IEEE 802.3
IP
Description
2 Components
9