Slots; Interface; Table 10-6 Interfaces On The Itn2100-8Fx Panel; Table 10-7 Parameters Of Interfaces 1-8 Of The Itn2100-8Fx - Raisecom iTN2100 Hardware Description

Raisecom
iTN2100 (P100R002) Hardware Description

10.2.2 Slots

The iTN2100-8FX can be plugged into slots 1–5 and 8–12 on the iTN2100.

10.2.3 Interface

Interface type
There are nine interfaces on the iTN2100-8FX panel, as listed in Table 10-6.

Table 10-6 Interfaces on the iTN2100-8FX panel

Interface
–
1–8
Interface parameters
Table 10-7 lists parameters of interfaces 1–8 of the iTN2100-8FX.
Table 10-7 Parameters of interfaces 1–8 of the iTN2100-8FX
Connector type
Interface rate
Duplex mode
Compliance standard
Table 10-8 lists transmission parameters of optical interfaces 1–8 of the iTN2100-8FX.
Table 10-8 Transmission parameters of optical interfaces 1–8 of the iTN2100-8FX
Optical Connector
interface
S1 DSC/PC
S2 DSC/PC
S3 DSC/PC
SS13 SC/PC
Type
MiniUSB
SFP optical interface
Parameter
Working Transmit
wavelength power
(nm) (dB)
1310 -15 to -8
1310 -5 to 0
1550/DFB -5 to 0
Tx: 1310 -12 to -3
Rx: 1550
Raisecom Technology Co., Ltd.
Debugging interface
Each optical interface can transmit one way of
Ethernet optical signals.
Description
SFP optical interface
100 Mbit/s
Full duplex
IEEE802.3 and IEEE802.3u
Receiver Light
sensitivity saturation
(dBm)
(dB)
-34 -8
-34 -8
-36 -10
-30 -8
10 Ethernet access cards
Description
Transmission
distance (km)
0–25
10–60
15–120
0–25
Optical
loss
(dB/km)
0.5
0.5
0.25
0.5
59