Interfaces; Leds; Table 7-9 Interfaces On The Opcom3500E-4Stm1-S Panel; Table 7-10 Parameters Of Interfaces 1-4 On The Opcom3500E-4Stm1-S - Raisecom iTN2100 Hardware Description

Raisecom
iTN2100 (P100R002) Hardware Description

7.2.3 Interfaces

Interface types
There are five interfaces on the OPCOM3500E-4STM1-S panel, as listed in Table 7-9.

Table 7-9 Interfaces on the OPCOM3500E-4STM1-S panel

–
1–4
Interface parameters
Table 7-10 lists parameters of interfaces 1–4 on the OPCOM3500E-4STM1-S.
Table 7-10 Parameters of interfaces 1–4 on the OPCOM3500E-4STM1-S
Connector type
Interface rate
Line code
Multiplexing structure
Clock parameters
Electrical parameters
Jitter

7.2.4 LEDs

There are 10 LEDs on the OPCOM3500E-4STM1-S panel, as listed in Table 7-11.

Table 7-11 LEDs on the OPCOM3500E-4STM1-S panel

PWR
Interface Type
MiniUSB
SFP optical
interface
Parameter
LED Status
Green
Raisecom Technology Co., Ltd.
Debugging interface

Service downlink interface
 Each optical interface can transmit a way of SDH
services.
 TX indicates sending and RX indicates receiving.
SFP optical interface
STM-1
NRZ
Comply with ITU-T G.707 recommendations.
Comply with ITU-T G.813 recommendations.
Comply with ITU-T G.957 recommendations.
Comply with ITU-T G.783 and ITU-T G.825 recommendations.
Power LED
 Green: the power supply is normal.

Off: the power supply is abnormal.
7 SDH tributary cards
Description
Description
Description
42