Alarms; Specifications; Table 15-39 Alarms Of The Opcom3500E-120Fe× 4-Ge; Table 15-40 Specifications Of The Opcom3500E-120Fe× 4-Ge - Raisecom iTN2100 Hardware Description

Raisecom
iTN2100 (P100R002) Hardware Description
DIP bit
Bit7
Bit8
By default, SW4 is all OFF.

15.7.6 Alarms

Table 15-39 lists alarms of the OPCOM3500E-120FE× 4-GE.
Table 15-39 Alarms of the OPCOM3500E-120FE× 4-GE
Optical interface LOS
alarm
Remote device LPR
alarm

15.7.7 Specifications

Table 15-40 lists specifications of the OPCOM3500E-120FE× 4-GE.
Table 15-40 Specifications of the OPCOM3500E-120FE× 4-GE
Dimensions
Weight
Max. power consumption
SW4 Function
Set E1 local or
remote loopback on
optical interface D.
Enable or disable
E1 1–4 loopback on
optical interface D.
Alarm
Parameter
Raisecom Technology Co., Ltd.
Status
ON Set E1 local loopback on optical interface D.
OFF Set E1 remote loopback on optical interface
D.
Enable E1 1–4 tributary loopback on optical
ON
interface D.
OFF Disable E1 1–4 tributary loopback on optical
interface D.
Cause
 Attenuation of received signals is over great.

The peer sender fails on the optical interface.
 The connector of fiber is dirty or improperly
connected.
 The local receiver fails.
The remote device is powered off.
25 mm (width) × 232 mm (depth) × 240 mm (height)
< 0.45 kg
10 W
15 PDH and RCMS cards
Description
Value
Level
Critical
Critical
168