Figure 2-2 Rear Panel Of The Chassis; Table 2-1 Descriptions Of The Chassis - Raisecom iTN2100 Hardware Description

Raisecom
iTN2100 (P100R002) Hardware Description

Figure 2-2 Rear panel of the chassis

Table 2-1 lists descriptions of the chassis.

Table 2-1 Descriptions of the chassis

No.
1
2
3
4
5
6
7
8
9
Name
Rack-mount bracket
Card slot
Dust-proof mesh
Power supply card slot
Tab
Heat dissipation
Alarm terminal
Fan power supply interface
Fan monitoring interface
Raisecom Technology Co., Ltd.
Description
Used to fix the chassis to a bench
Cards are plugged into slots 0–12.
Used to contain the dust-proof cotton to prevent
dust from accessing the device.
Power supply cards are plugged into slots POWER1
and POWRE2.
Used to fix the fan on the chassis
The fan is installed above the heat dissipating area
to dissipate hot air inside the chassis.
Four-hole spring terminal supporting one-way
alarm input and one-way alarm output
The DC voltage connected to the alarm
output terminal should not exceed 30 V and
the current should not exceed 1 A. The AC
voltage connected to the alarm output
terminal should not exceed 125 V and the
current should not exceed 0.3 A.
Used to supply power to the fan
Used to connect to the fan and monitor its status
Chassis
6