Raisecom
iTN2100 (P100R002) Hardware Description
Figure 21-14 E1-CC3 cable
21.8.3 Specifications
Table 7-9 lists specifications of the E1-CC3 cable.
Table 21-11 Specifications of the E1-CC3 cable
Name
Connector
Type
21.9 E1-DB37 cables
21.9.1 Introduction
The E1-DB37 cable is used to connect the DB37 male connector of the iTN2100 and other
devices to transmit E1 services.
Table 21-12 lists relations between the E1-DB37 cable and the card on the iTN2100.
Table 21-12 Relations between the E1-DB37 cable and the card on the iTN2100
OPCOM3500E-EOPS-8E1
OPCOM3500E-16E1
OPCOM3500E-EOPS-8E1-BL
OPCOM3500E-16E1-BL
21.9.2 CBL-E1-DB37F (40)/16NC
Appearance
Figure 21-15 shows the CBL-E1-DB37F(40)/16NC cable.
Parameter
CBL-E1-CC3/BNCF
CC3 female connector, BNC female connector
1C+B co-axial cable
Card
Raisecom Technology Co., Ltd.
Description
CBL-E1-DB37F (40)/16NC
CBL-E1-DB37F/16BNCF
CBL-E1-DB37F/16BNCM
CBL-E1-DB37F/8RJ45
21 Cables
Cable
255