Raisecom
iTN2100 (P100R002) Hardware Description
8.1.3 Interfaces
Interface types
There are seven interfaces on the iTN2100-NTU-4GF panel, as listed inTable 8-1.
Table 8-1 Interfaces on the iTN2100-NTU-4GF panel
–
1–4
SYNC-RX
SYNC-TX
Interface parameters
Table 8-2 lists parameters of interfaces 1–4 on the iTN2100-NTU-4GF.
Table 8-2 Parameters of interfaces 1–4 on the iTN2100-NTU-4GF
Connector type
Line code
Transmission rate
Working mode
Maximum supported frame length
Supported frame format
Supported network protocol
Compliance standard
Supported optical modules
8.1.4 LEDs
There are 11 LEDs on the iTN2100-NTU-4GF, as listed in Table 8-3.
Interface
MiniUSB
SFP optical interface
CC3 male connector
CC3 male connector
Parameter
Raisecom Technology Co., Ltd.
Type
Debugging interface
Service uplink interface
BITS clock input
BITS clock output
SFP (LC/PC)
8B/10B
1.25 Gbit/s
Full duplex
13 KB
Ethernet-II, Ethernet-SAP, and Ethernet-SNAP
IP
IEEE 802.3
100BASE-FX SFP, 1000BASE-X SFP,
1000BASE-T SFP, and 10/100/1000BASE-T SFP
8 Ethernet aggregation card
Description
Description
47