Table 15-63 Configurations Of Dip Switch Sw2 On The Opcom3500E-240H× 2; Table 15-64 Configurations Of Dip Switch Sw3 On The Opcom3500E-240H× 2 - Raisecom iTN2100 Hardware Description

Raisecom
iTN2100 (P100R002) Hardware Description
Table 15-63 Configurations of DIP switch SW2 on the OPCOM3500E-240H× 2
SW2
DIP bit
Bit1
Bit2
Bit3
Bit4
Bit5
Bit6
Bit7
Bit8
By default, SW2 is all OFF. Namely, local and remote E1 loopback is diabled, and
ALS is disabled on all optical interfaces by default.
Table 15-64 Configurations of DIP switch SW3 on the OPCOM3500E-240H× 2
switch
SW3
Function
Set E1 local or
remote loopback on
optical interface A.
Enable or disable
E1 1–8 loopback on
optical interface A.
Set E1 local or
remote loopback on
optical interface B.
Enable or disable
E1 1–8 loopback on
optical interface B.
Enable ALS on the
optical interface.
Reserved
DIP Function
Set the type
of the
optical
interface
device.
Raisecom Technology Co., Ltd.
Status
ON Set E1 local loopback on optical interface A.
OFF Set E1 remote loopback on optical interface
A.
ON Enable E1 1–8 tributary loopback on optical
interface A.
OFF Disable E1 1–8 tributary loopback on optical
interface A.
ON Set E1 local loopback on optical interface B.
OFF Set E1 remote loopback on optical interface
B.
Enable E1 1–8 tributary loopback on optical
ON
interface B.
OFF Disable E1 1–8 tributary loopback on optical
interface B.
ON Enable ALS.
OFF Disable ALS.
Status
Bit1 Bit2 Bit3
ON ON ON
ON ON ON
ON ON OFF
ON ON OFF
15 PDH and RCMS cards
Description
Description
Bit4 Optical interface
device
ON M
OFF S1
ON S2
OFF S3
184