Alarms; Specifications; Table 14-29 Alarms Of The Opcom3500E-8Eos-Fx; Table 14-30 Specifications Of The Opcom3500E-8Eos-Fx - Raisecom iTN2100 Hardware Description

Raisecom
iTN2100 (P100R002) Hardware Description
DIP bit
Bit3
Bit4
By default, Bit2 of SW3 is OFF.

14.5.6 Alarms

Table 14-29 lists alarms of the OPCOM3500E-8EOS-FX.

Table 14-29 Alarms of the OPCOM3500E-8EOS-FX

Alarm overall alarm
Optical signal LOS alarm
Ethernet optical interface
link failure alarm
Remote device LPR alarm

14.5.7 Specifications

Table 14-30 lists specifications of the OPCOM3500E-8EOS-FX.

Table 14-30 Specifications of the OPCOM3500E-8EOS-FX

Dimensions
Weight
Max. power consumption
SW3 Function
Ethernet
services
Reserved
Alarm
Parameter
Raisecom Technology Co., Ltd.
Status
OFF Set the front plane interface to the egress
interface of Ethernet services.
Cause
TU-AIS, TU-LOP
No optical signals are input.

Fiber is disconnected.
 The RX and TX of the remote device fail.
The remote transceiver is powered off.
25 mm (width) × 232 mm (depth) × 240 mm (height)
0.4 kg
10 W
Description
Value
14 EOS cards
Level
Critical
Critical
Critical
Critical
134