Temperature Setback - Pace ST 40A Operation & Maintenance Manual

HI (Upper) Temperature Limit Setpoint
12. The Digital Readout now displays "Hi
Limit = XXX°C (or F)". This is the
stored value of the Upper Temperature
Limit.
13. Press Scroll Keys as necessary to increase
(Scroll Up ( ) Key) or decrease (Scroll
Down ( ) Key) the Upper Temperature
Limit value.
14. Press and release the Set Key.

Temperature Setback

15. The Digital Readout now displays
"Setback Enabled (or Disabled) Push
to Change". Press the Scroll Up ( ) Key
if you wish to change the current
selection. As received from the factory,
the Temperature Setback is Disabled.
16. Press and release the Set Key.
17. The top line of the Digital Readout will
now display "Setback = X:XX"
indicating time to Auto Setback in hours
and minutes (5 minutes minimum, 2
hours max.) in increments of 1 minute.
To change the time period, press the
Scroll Keys. Press the Scroll Up ( ) Key
to increase the time period. Press the
Scroll Down ( ) Key to decrease the
time period.
Set-Up Mode
XXX
XXX
XXX
X X X
33