Table of Contents
Advertisement
Temperature Specifications:
Tip Temperature Range: 38°C to 482°C (100°F to 900°F) nominal.
Temperature Stability:
NOTE - Actual minimum and maximum Operating Tip Temperatures may
vary depending on Handpiece, Tip selection and application.
EOS/ESD Specifications:
The specifications shown below apply except on "Soft Ground Systems"
which have a 1 meg ohm current limiting resistance and a label placed on
the power source front panel referring to EN 100015-1.
Parts Identification
Tip-To-Ground Resistance: Less than 5 ohms.
AC Leakage: Less than 2 Millivolts RMS from 50Hz to 500Hz.
General Information
±1.1°C (±2°F) at idle from set tip temp.
5
Advertisement
Table of Contents
