Table of Contents
Advertisement
e) An hour glass icon at the top left corner
of the Digital Readout if the
Temperature Setback/Auto Off features
are enabled. This icon will flash 1
minute prior to Temperature Setback
and will continue flashing in
Temperature Setback.
f) The Set Tip Temperature ("Set Temp =
XXX") in the Tip Temperature Set
Mode, and the Tip Offset Constant
value ("Offset = XXX") for offset
values greater than 0.
g) The Tip Offset Constant ("Offset =
XXX") above the Set Tip Temperature
("Set Temp = XXX") i n the Tip
Offset Mode.
h) "**" in Temperature Display Mode, if
the stored Tip Offset Constant value is
greater than 0.
i) A variety of text messages to denote
system status (e.g., time to setback,
Password entry instruction etc.).
Operation
C
XXX
XXX
XXX
C
XXX
C
XXX
21
Advertisement
Table of Contents
