F/°C Digital Readout; Temperature Limits - Pace ST 40A Operation & Maintenance Manual

Set-Up Mode
°F/°C Digital Readout
7. The Digital Readout will now display
"Display is °F (or °C) Push
Change". Press the Scroll Up ( ) Key if
you wish to change the temperature
readout (°C or °F).
8. Press the Set Key.

Temperature Limits

The HI (upper temperature) Limit setpoint must be set above or equal to the
LO (lower temperature) Limit setpoint.
LO (Lower) Temperature Limit Setpoint
9. The top line of the Digital Readout will
now display "Lo Limit = XXX°C (or
°F)". This is the stored value of the
Lower Temperature Limit in increments
of 1° (F or C).
10. Press Scroll Keys as necessary to increase
(Scroll Up ( ) Key) or decrease (Scroll
Down ( ) Key) the Lower Temperature
Limit value.
11. Press and release the Set Key.
32
to
NOTE
D i s p l a y i s ° C
P u s h
t o C h a n g e
D i s p l a y i s ° C
P u s h t o C h a n g e
XXX
XXX
XXX