Status Bar
Parameters Window
Keysight M8131A 16/32 GSa/s Digitizer User's Guide
The status bar contains the following fields from left to right:
•
Connection state:
•
"Not Connected" – No instrument is connected.
•
"Connected: <Instrument resource string>" – An instrument is
connected. The resource string, for example PXI36::0::0::INSTR is
displayed.
•
"Simulation Mode" – No real instrument is connected. The user
interface is in simulation mode. Click this field to open the
Instrument Selection Dialog.
•
Instrument status - Displays the instrument status, for example "Reset
complete" after issuing a reset command.
The Parameters Window provides various tabs which are used to
configure the parameters of the M8131A instrument. These tabs include:
Acquisition, Trigger, Clock, Configurations, IOs and System Monitor.
Figure 9
on page 60 illustrates an example of the Parameters Window.
M8131A User Interface
59
3