System:license:extended:list; System:set[?] - Keysight Technologies M8131A User Manual

7 Remote Programming

:SYSTem:LICense:EXTended:LIST?

:SYSTem:SET[?]

152
The syntax of the response is defined as: The <nonzero digit> and
sequence of <digit> follow the rules in IEEE 488.2, Section 8.7.9. A <SCPI
header> is defined as: It contains all the nodes from the root. The <SCPI
program mnemonic> contains the node in standard SCPI format. The short
form uses uppercase characters while the additional characters for the
long form are in lowercase characters. Default nodes are surrounded by
square brackets ([]).
Example Query
:SYST:HELP:HEAD?
Query
:SYSTem:LICense:EXTended:LIST?
Description The query lists the licenses installed.
Example Query
:SYST:LIC:EXT:LIST?
Command
:SYSTem:SET[?] <binary block data>
Description In query form, the command reads a block of data containing the
instrument's complete set-up. The set-up information includes all
parameter and mode settings, but does not include the contents of the
instrument setting memories or the status group registers. The data is in a
binary format, not ASCII, and cannot be edited.
In set form, the block data must be a complete instrument set-up read
using the query form of the command.
This command has the same functionality as the *LRN command.
Parameters <binary block data>
Example Command
:SYST:SET <binary block data>
Query
:SYST:SET?
Keysight M8131A 16/32 GSa/s Digitizer User's Guide