Keysight Technologies M9391A Manual

Keysight Technologies M9391A Manual

Pxie vector signal analyzer
Hide thumbs Also See for M9391A:

Advertisement

Quick Links

Keysight Technologies
M9391A PXIe Vector Signal Analyzer
1 MHz to 3 or 6 GHz
Specifications
Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the M9391A and is the answer not in the manual?

Questions and answers

Summary of Contents for Keysight Technologies M9391A

  • Page 1 Keysight Technologies M9391A PXIe Vector Signal Analyzer 1 MHz to 3 or 6 GHz Specifications Guide...
  • Page 2 DFARS and are set forth speciically agreement and written consent from chassis, controllers, modules, etc.) perfor- in writing elsewhere in this EULA. Keysight Technologies, Inc. as governed by mance, safety, or regulatory compliance, Keysight shall be under no obligation United States and international copyright unless specifically stated.
  • Page 3 in the specifications and operating informa- – Service personnel are trained to work The responsible body must ensure that on live circuits, perform safe installa- tion, and as shown on the instrument or test operators are prevented access and/or tions, and repair products. Only properly fixture panels, or switching card.
  • Page 4 To prevent electrical shock, disconnect A 급 기기 ( 업무용 방송통신기자재 ) the Keysight Technologies instrument from 이 기기는 업무용 (A 급 ) 전자파적합 mains before cleaning. Use a dry cloth or 기기로서 판 매자 또는 사용자는 이 점...
  • Page 5: Table Of Contents

    How to use this document This document contains technical specifications for all versions of the M9391A PXIe Vector Signal Analyzer. Specifications published in the datasheet only apply to the current manufactur- ing version of the equipment. If a specification only applies to a certain manufacturing version of the equipment, it is indicated in this document.
  • Page 6: Definitions For Specifications

    6 | Keysight | M9391A PXIe Vector Signal Analyzer 1 MHz to 3 or 6 GHz - Specifications Guide Technical Specifications and Characteristics Definitions for specifications Characteristics describe product performance that is useful in the application of the product, but that is not covered by the Temperatures referred to in this document are defined as follows: product warranty.
  • Page 7: Frequency

    7 | Keysight | M9391A PXIe Vector Signal Analyzer 1 MHz to 3 or 6 GHz - Specifications Guide Technical Specifications and Characteristics Frequency Frequency range and resolution Option F03 1 MHz to 3 GHz Option F06 1 MHz to 6 GHz Tuning resolution 0.001 Hz...
  • Page 8 8 | Keysight | M9391A PXIe Vector Signal Analyzer 1 MHz to 3 or 6 GHz - Specifications Guide Technical Specifications and Characteristics Frequency (continued) Frequency reference (M9300A PXIe frequency reference module) Reference outputs 100 MHz Out (Out 1 through Out 5) Amplitude ≥...
  • Page 9: Amplitude

    9 | Keysight | M9391A PXIe Vector Signal Analyzer 1 MHz to 3 or 6 GHz - Specifications Guide Technical Specifications and Characteristics Amplitude Input level Max safe average total power +30 dBm (1 W) Max DC voltage 25 Vdc...
  • Page 10 010 | Keysight | M9391A PXIe Vector Signal Analyzer 1 MHz to 3 GHz or 6 GHz - Data Sheet Technical Specifications and Characteristics Amplitude (continued) Amplitude repeatability and linearity Input signal relative to expected input level setting Specification Repeatability <0.05 dB, nominal...
  • Page 11 11 | Keysight | M9391A PXIe Vector Signal Analyzer 1 MHz to 3 or 6 GHz - Specifications Guide Technical Specifications and Characteristics Amplitude (continued) IF bandwidth filter switching uncertainty Specification Typical Nominal ±0.4 dB ±0.15 dB ±0.09 dB Expected input level switching uncertainty...
  • Page 12: Dynamic Range

    12 | Keysight | M9391A PXIe Vector Signal Analyzer 1 MHz to 3 or 6 GHz - Specifications Guide Technical Specifications and Characteristics Dynamic range Displayed average noise level (DANL) Conversion type Frequency Specification Nominal Pre−amp OFF Image protect < 100 MHz −145 dBm/Hz...
  • Page 13 13 | Keysight | M9391A PXIe Vector Signal Analyzer 1 MHz to 3 or 6 GHz - Specifications Guide Technical Specifications and Characteristics Dynamic range (continued) Second harmonic distortion (SHI) Conversion type: image protect Frequency SHI, nominal Distortion, nominal – 45 dBc Pre-amp OFF ≤...
  • Page 14 14 | Keysight | M9391A PXIe Vector Signal Analyzer 1 MHz to 3 or 6 GHz - Specifications Guide Technical Specifications and Characteristics Dynamic range (continued) Nominal Dynamic Range at 2 GHz Pre-Amp Off, Image Protect -100 -110 -120 -130...
  • Page 15: Spectral Purity

    15 | Keysight | M9391A PXIe Vector Signal Analyzer 1 MHz to 3 or 6 GHz - Specifications Guide Technical Specifications and Characteristics Spectral purity Phase noise Conversion type Center frequency Offset Nominal Single low 1.1 GHz 10 kHz −120 dBc/Hz...
  • Page 16 16 | Keysight | M9391A PXIe Vector Signal Analyzer 1 MHz to 3 or 6 GHz - Specifications Guide Technical Specifications and Characteristics Spectral purity (continued) Residuals, images & spurious responses Non-input related spurs Conversion type Frequency Nominal Expected input level Pre-amp ON ≤...
  • Page 17: Data Acquisition

    17 | Keysight | M9391A PXIe Vector Signal Analyzer 1 MHz to 3 or 6 GHz - Specifications Guide Technical Specifications and Characteristics Data acquisition Maximum capture memory Non-list mode List mode Option M01 128 MSample (512 MB) 128 MSample (512 MB)
  • Page 18: Measurement Speed

    18 | Keysight | M9391A PXIe Vector Signal Analyzer 1 MHz to 3 or 6 GHz - Specifications Guide Technical Specifications and Characteristics Measurement speed IQ data capture Nominal Large block (50 MSamples) 1.5 s Transferred in 100 kSa or 1 MSa blocks...
  • Page 19 19 | Keysight | M9391A PXIe Vector Signal Analyzer 1 MHz to 3 or 6 GHz - Specifications Guide Technical Specifications and Characteristics Format Specific measurement (continued) W−CDMA Parameters Typical Nominal 51, 52 Residual EVM 2 GHz, 1 DPCH, 1 carrier 0.5%...
  • Page 20 20 | Keysight | M9391A PXIe Vector Signal Analyzer 1 MHz to 3 or 6 GHz - Specifications Guide Technical Specifications and Characteristics Format specific measurement (continued) Spectral Emissions Limit Figure 7. WLAN 802.11ac SEM at 5.8 GHz, 80 MHz bandwidth.
  • Page 21 59. Synthesizer PLL mode set to PLL mode normal. 60. MIMO configurations require M9391A instrument driver version 1.1 or greater, with each channel configured with its own independent synthesizer. Sharing a single synthesizer will degrade EVM performance approximately 1 dB.
  • Page 22: Environmental And Physical Specifiations

    22 | Keysight | M9391A PXIe Vector Signal Analyzer 1 MHz to 3 or 6 GHz - Specifications Guide Technical Specifications and Characteristics Environmental and physical specifications Operating Individual module temp 25 to 75 °C as reported by the module and environment temp of 0 to 55 °C...
  • Page 23: System Requirements

    23 | Keysight | M9391A PXIe Vector Signal Analyzer 1 MHz to 3 or 6 GHz - Specifications Guide Technical Specifications and Characteristics System requirements Topic Windows 7 requirements Operating systems Windows 7 (32-bit and 64-bit) Processor speed 1 GHz 32-bit (x86), 1 GHz 64-bit (x64)
  • Page 24 24 | Keysight | M9391A PXIe Vector Signal Analyzer 1 MHz to 3 or 6 GHz - Specifications Guide For more information on Keysight For more information on Keysight myKeysight Technologies’ products, applications or Technologies’ products, applications or www.keysight.com/find/mykeysight services, please contact your local Keysight services, please contact your local Keysight A personalized view into the information most relevant to you.

This manual is also suitable for:

90015

Table of Contents