Trigger:output:mode; Trigger:output:source - Keysight Technologies M8131A User Manual

:TRIGger:OUTPut:MODE

Returned Format

:TRIGger:OUTPut:SOURce

Returned Format
Keysight M8131A 16/32 GSa/s Digitizer User's Guide
Command
:TRIGger:OUTPut:MODE {A|B},
{LOW|HIGH|TOGGle|FSM|BYPass}
Description The command selects the trigger output mode for the selected FPGA. The
mode determines, which data the FPGA sends to the trigger output. The
:TRIGger:OUTPut:SOURce command finally determines, which FPGA's
data is displayed at the trigger output.
A Selects FPGA A.
B Selects FPGA B.
LOW Constant low-level
HIGH Constant high-level
TOGGle Low-level/high-level toggle pattern
FSM Output from the trigger Finite State Machine (default), a pulse on
every detected trigger on channels 1 to 4.
BYPass By-pass the trigger FSM and output a signal generated by the
selected FPGA. This mode is used by the Deterministic Latency setup
procedure.
Query :TRIGger:OUTPut:MODE? {A|B}
The query returns the current trigger output mode.
[:TRIGger:OUTPut:MODE {A|B}] { LOW|HIGH |TOGGle|FSM|BYPass }<NL>
Command
:TRIGger:OUTPut:SOURce {A|B}
Description The command selects, which FPGA's data is displayed at the trigger
output.
A Selects FPGA A.
B Selects FPGA B.
Query :TRIGger:OUTPut:SOURce?
The query returns the current trigger output source.
[:TRIGger:OUTPut:SOURce] {A|B }<NL>
Remote Programming
179
7