Table of Contents
Advertisement
Remote Programming
7
:DPRocessing:DDC:RESet
Command
:DPRocessing:DDC:RESet [<channel_mask>]
Description
The command resets the phase of the DDC.
<channel_mask>
Bit field specifying, for which channel the DDC phase should be reset.
Bit 0: channel 1
Bit 1: channel 2
Bit 2: channel 3
Bit 3: channel 4
If the parameter is omitted, the DDC phases of all channels are reset.
Keysight M8131A 16/32 GSa/s Digitizer User's Guide
137
Advertisement
Table of Contents
