Table of Contents
Advertisement
7
Remote Programming
:MMEMory:STORe:WAVeform
146
Command
:MMEMory:STORe::WAVeform CHANnel<N>, "<file_name>"
[,<format>[,<header>]]
Description
Saves a waveform from the selected channel to a file.
<N> An integer, 1-4.
<file_name> A quoted ASCII string with a maximum of 254 characters
including the entire path name, if used. The filename assumes the present
working directory if a path does not precede the file name.
<format> {TXT } ASCII file format. If the DPRocessing:MODE is
DIRect, data consists of voltage values separated by a carriage return
and line feed. If the DPRocessing:MODE is DDC, data consists of IQ value
pairs separated by a carriage return and line feed. The two values of a pair
are separated by a comma.
<header> {{ON | 1} | {OFF | 0}}
ON | 1 A header precedes the data.
OFF | 0 Only data without header (default).
Example: File header and beginning of data for a waveform captured in
DIRect mode:
Revision: 0
Type:
Points:
XInc:
XOrg:
XUnits:
YInc:
YOrg:
YUnits:
Data:
3.23486E-02
3.33252E-02
...
raw
1600
6.25e-11
0
second
0.0005
0
Volt
Keysight M8131A 16/32 GSa/s Digitizer User's Guide
Advertisement
Table of Contents
