Table of Contents
Advertisement
3
M8131A User Interface
Tool Bar
56
The tool bar provides the following convenient functions:
Capturing
Run
Stop
Single
Use mouse to control marker
Use mouse to zoom
Auto scale once
This is an icon to mark the buttons to its right to be related to capturing. A
capture is done via Single and Run buttons. Its functionality expects at least
one selected channel (a channel can be selected from Acquisition Tab >
Channel Parameters > Display On check-box).
After completion of every capture, the current data buffer is cleared and
replaced by the new measured values, and the corresponding time and
frequency signals are plotted in trace windows.
This icon enables you to start a repetitive capturing.
This icon enables you to stop a capture.
This icon enables you to start a single capture.
If selected, a marker is added to the selected trace. Using the mouse, the
marker can be moved on the trace in order to read the value of desirable
points. To set the marker to a different channel, right click on graph panel
(the black area) and select the desirable channel number from Marker > Set
to Channel X. Set to Channel X is disabled if its corresponding channel
number from Acquisition Tab > Channel Parameters > Display On check-box
is not selected.
Use this tool to select a rectangular area of a trace for closer examination.
Auto Scale adjusts All open windows' scaling so that the whole traces are
visible. An auto-scale for one window can be done via Auto Scale inside
graph panel's context menu (i.e. right-click and use context menu).
Keysight M8131A 16/32 GSa/s Digitizer User's Guide
Advertisement
Table of Contents
