Table of Contents
Advertisement
3
M8131A User Interface
Launching the M8131A Soft Front Panel
44
There are two ways to launch the M8131A Soft Front Panel:
1
Select Start Menu > All Programs > Keysight M8131 > Keysight
M8131 Soft Front Panel from the Start menu.
2
From the Keysight Connection Expert select the discovered M8131
module, select the "Installed Software" tab and press the "Soft Front
Panel" icon. Please note that only instruments connected via PCIe are
shown in the Keysight Connection Expert.
The following Connect to Instrument dialog will appear:
Figure 4
M8131A connected to PC
This dialog shows the addresses of the discovered M8131A modules.
Select a module from the list and press "Connect".
If no M8131A module is connected to your PC, you can select "Simulation
Mode" to simulate an M8131A module.
Keysight M8131A 16/32 GSa/s Digitizer User's Guide
Advertisement
Table of Contents
