Table of Contents
Advertisement
Related Documents
Keysight M8131A 16/32 GSa/s Digitizer User's Guide
LEDs
The M8131A front panel has the following LEDs:
• Status LEDs
The "Fail" and "Access" LEDs are available at the front panel to indicate
the status of the M8131A module:
•
The green "Access" LED indicates that the controlling PC exchanges
data with the M8131A module.
•
The red "Fail" LED has following functionality:
•
It is 'ON' for about 30 seconds after powering the AXIe chassis.
•
After about 30 seconds the LED is switched 'OFF'. If an external
PC is used to control the AXIe chassis, this PC can be powered
after this LED has switched OFF.
•
During normal operation of the module this LED is 'OFF'. In
case of an error condition such as e.g. a self-test error, the LED
is switched 'ON'.
•
In case the output relay has shut-off because of an external
overload condition, this LED flashes.
To access documentation related to the Keysight M8131A digitizer, use
one of the following methods:
•
CD - Browse the product CD for M8131A documentation.
•
Start > All Programs > Keysight M8131 > Keysight M8131
Documentation - Provides links to all product documentation.
•
Go to the product web site (http://www.keysight.com/find/M8131A)
and browse the manuals under Document Library tab.
Introduction
1
23
Advertisement
Table of Contents
