Important Parameters; Decode Tab; Figure 10.1: Decode Tab - Leuze electronic BCL 8 Series Original Operating Instructions

Important parameters

10 Important parameters
10.1

Decode tab

Figure 10.1: Decode tab

Code table
Number of
digits
NOTE
If the code EAN128 is to be read, 3 additional characters are to be set for the code identi-
fier.
Features
46
Here, the codes which are to be decoded are set. We recommend enabling
only the code types which are to actually be read with the corresponding
element numbers. Codes which are not enabled are not decoded!
In the field Element number, up to 3 element entries may be entered.
An area is represented by a dashed line:
With 2 or 3 different element entries
by a comma:
The combination is also possible,
but the range must be specified first:
Behind the "Properties" button, to the right of the respective code, the
code-specific settings, such as the check digit, can be selected.
BCL 8
e.g. 4-40 digits.
e.g.: 8,13 digits
e.g.: 4-10,20 digits
Leuze electronic