Lubricate Wheel Hubs - Norwood Kwik-Till HSD2500 Operator's Manual

MONTHLY

Lubricate Wheel Hubs

1. Unfold the machine into the Field Position.
Till Folding & Unfolding" on page 4-11)
2. Lower the disks to the ground by retracting the Front
Wheel Cylinders A and Rear Roller Cylinders B .
(See Fig. # 5-26)
Fig. # 5-26 Lower Disks to the Ground
3. Relieve all the hydraulic pressure by placing the tractor
SCV levers to the FLOAT POSITION
running for the Main Frame Lift & Wing Fold cylinders.
4. The machine should now be in the "Field Lowered Po-
sition"
(See Fig. # 3-53)
5. Apply 3-4 pumps of grease
(See Fig. # 5-27)
IMPORTANT
If grease is visible on the back side of the hub, reduce the
amount of grease added by 50%.
30 D
Fig. # 5-27 Grease Zerk Locations 25', 30' 35', 40', & 45'
(See "Kwik-
A
B
with engine
.
to the hubs monthly.
30 D
30 D
5 - MAINTENANCE
5-24