Kwik-Till Unfolding - Norwood Kwik-Till HSD2500 Operator's Manual

KWIK-TILL FOLDING & UNFOLDING
Follow the steps in Kwik-Till Unfolding (See Below) & Kwik-
Till Folding
(See "Kwik-Till Folding" on page 4-15)
unfold the Kwik-Till from the transport position, and fold the
Kwik-Till from the field position.

Kwik-Till Unfolding

1. If the Kwik-Till is already attached to the tractor, proceed to
step # 2, if not already attached to tractor.
Kwik-Till To Tractor" on page 3-9)
2. Transport the Kwik-Till onto level ground.
Fig. # 4-25 Kwik-Till Shown In The Transport Position
WARNING
Before disconnecting equipment, servicing, adjusting,
:
or repairing
Park on a level surface, engage park brake, place
transmission in PARK, shut off engine, remove key, and wait
for all moving parts to stop before leaving the tractor cab.
4 - WORKING OPERATIONS
Always return the transport locks in the stowed position on
the Kwik-Till when not in use.
to properly
3. Remove the Transport Locks
sition
Fig. # 4-26)
(See "Attaching
(See Fig. # 4-25)
Fig. # 4-26 Transports Lock Shown In Locked Position
B
A
Fig. # 4-27 Transports Lock Shown In Stowed Position
4-11
IMPORTANT
B
and install into the Stowed Position
A
D
C B
D
C
A
from the Locked Po-
C
.
(See
A
B A