Check For Hydraulic Leaks - Norwood Kwik-Till HSD2500 Operator's Manual

DAILY

Check For Hydraulic Leaks

1. Unfold the machine into the Field Position.
Till Folding & Unfolding" on page 4-11)
2. Lower the disks to the ground by retracting the Front
Wheel Cylinders A and Rear Roller Cylinders B .
(See Fig. # 5-5)
Fig. # 5-5 Lower Disks to the Ground
3. Relieve all the hydraulic pressure by placing the tractor
SCV levers to the FLOAT POSITION
running for the Main Frame Lift & Wing Fold cylinders.
4. The machine should now be in the "Field Lowered Po-
sition"
(See Fig. # 3-53)
WARNING
Hydraulic oil leaking under pressure can penetrate the skin,
causing death or serious injury, or infection.
DO NOT use your hand to check for leaks. Use a piece of
cardboard or plywood.
5. Check all Hydraulic Hoses A , Adapters B , Cross-
overs C , Junctions, D , & Hydraulic Cylinders E for
leaks.
(See Fig. # 5-6) (See Fig. # 5-7) (See Fig. # 5-8)
(See "Kwik-
A
B
with engine
.
5 - MAINTENANCE
A
B
Fig. # 5-6 Check For Hydraulic Leaks
E
C
Fig. # 5-7 Check For Hydraulic Leaks
D
Fig. # 5-8 Check For Hydraulic Leaks
5-8
B
B
C