Check For Damaged Hydraulic Hoses, Adapters, Crossovers, Junctions, & Hydraulic Cylinders - Norwood Kwik-Till HSD2500 Operator's Manual

DAILY
Check For Damaged Hydraulic Hoses, Adapt-
ers, Crossovers, Junctions, & Hydraulic Cylin-
ders
1. Unfold the machine into the Field Position.
Till Folding & Unfolding" on page 4-11)
2. Lower the disks to the ground by retracting the Front
Wheel Cylinders A and Rear Roller Cylinders B .
(See Fig. # 5-9)
Fig. # 5-9 Lower Disks to the Ground
3. Relieve all the hydraulic pressure by placing the tractor
SCV levers to the FLOAT POSITION
running for the Main Frame Lift & Wing Fold cylinders.
4. The machine should now be in the "Field Lowered Po-
sition"
(See Fig. # 3-53)
5. Visually check for damaged Hydraulic Hoses A , Adapt-
ers B , Crossovers C , Junctions, D , & Hydraulic
Cylinders E .
(See Fig. # 5-10) (See Fig. # 5-11) (See
Fig. # 5-12)
(See "Kwik-
A
B
with engine
.
5 - MAINTENANCE
A
B
Fig. # 5-10 Check For Damaged Hydraulic Hoses, & Adapt-
E
C
Fig. # 5-11 Check For Damaged Adapters, Crossovers, &
D
Fig. # 5-12 Check For Damaged Junctions
5-9
B
ers
B
Hydraulic Cylinders
C