Preparing The Tractor; Use Tractor Operator's Manual; Determine Tractor Requirements; Hydraulic Requirements - Norwood Kwik-Till HSD2500 Operator's Manual

Preparing The Tractor

Use Tractor Operator's Manual

Fig. # 3-2 Use Tractor Operator's Manual
Always refer to tractor Operator's Manual for specific, detailed
information regarding operation of equipment. Use the tractor
Operator's Manual for detailed information as procedures
vary by equipment.
3 - TRANSPORT OPERATIONS

Determine Tractor Requirements

For optimum performance, see "Tractor Engine Power
Requirements" in the Specifications section.
on page 7-1)
Install adapters if the tractor does not have ISO hydraulic
couplers. See your tractor dealer or qualified service provider.

Hydraulic Requirements

2900 psi (183 bar) (18 271 kPa) tractor hydraulic system with
ISO hydraulic couplers is required.
5 tractor control valves are preferred for operating the
Kwik-Till, 4 Minimum. 6 tractor control valves are required If
equipped with the rubber roller scrapers.
3-2
Fig. # 3-3 Determine Tractor Requirements
(See Fig. # 7-1