Check Disks For Damage And / Or Excessive Wear - Norwood Kwik-Till HSD2500 Operator's Manual

ANNUALLY
Check Disks For Damage And / Or Excessive
Wear
1. Fold the machine into the Transport Position.
"Kwik-Till Folding & Unfolding" on page 4-11)
WARNING
When servicing the machine in the transport position, the
wings must be secured with the transport locks.
2. Make sure the Transport Locks
the Stowed Position
B
Position .
(See Fig. # 5-28)
A
D
C
Fig. # 5-28 Transports Lock Shown In Locked Position
3. Check all disks on the machine.
Fig. # 5-29 Check All Disks On The Machine
5 - MAINTENANCE
A
are moved from
C
, and installed into the Locked
B A
(See Fig. # 5-29)
A
4. Replace damaged disks or disks that are worn 2.0 in
(50.8 mm) smaller than their original diameter. (Note:
Norwood recommends replacing at 2.0 in (50.8 mm) wear
for optimum performance.)
(See
Blades wear differently depending on conditions and proper
operation.
Fig. # 5-30 Replace Damaged Disks Or Disks That Are
5-25
NOTE
A
Worn