Using The Seven-Terminal Outlet - Norwood Kwik-Till HSD2500 Operator's Manual

When transporting the Kwik-Till on a road or highway at
night or during the day, use lights and devices to properly
warn the operators of other vehicles.
Follow local regulations for equipment lighting and marking.
Keep lighting and marking visible, clean, and in good
working order. Replace or repair lighting and marking that
has been damaged or lost.
Replacement lights and devices are available from your
Kwik-Till dealer.
17. Connect the Warning Light Plug A to the Seven-Ter-
minal Outlet B on the tractor.
18. Verify correct operation of all warning lights.
19. To obtain maximum warning, be sure that warning lights,
reflectors, and SMV emblem are clean.
A
Fig. # 3-38 Connect Warning Light Plug
3 - TRANSPORT OPERATIONS
CAUTION
(See Fig. # 3-38)
B

Using The Seven-Terminal Outlet

A Seven Terminal Outlet B is used to connect road lights,
turn signals, brake lights, & hazard lights.
Always use auxiliary lights on towed implement when tractor
rear signals and other lights are obscured.
Refer to the following table for the Terminal Number A
definitions and their functions.
Fig. # 3-39 Seven-Terminal Outlet Terminal Numbers
Terminal
Numbers
Function
A
1 Ground
2 Flood Light
Left Turn Signal &
3
Hazard Signal Lamps
4 Brake Lights
Right Turn Signal &
5
Hazard Signal Lamps
6 Tail Light
7 Accessory
Fig. # 3-40 Table: Seven-Terminal Outlet Terminal Numbers
3-15
(See Fig. # 3-39)
(See Fig. # 3-40)
B
A
1
6 2
7
5 3
4
Wire Color
White
Black (Not Used)
Yellow
Red
Green
Brown
Blue (Not Used)