Check Tire Pressure; Check Wheel Hardware - Norwood Kwik-Till HSD2500 Operator's Manual

Check Tire Pressure

Load/Speed
Tire Size
Index
600/50R22.5 168B
710/40R22.5 170B
710/45R22.5 170B
800/40R22.5
176B
Fig. # 3-16 Table: Tire Pressures
Tire failure due to overloading can cause loss of vehicle
control during transport resulting in serious injury or
death to you or others. Prevent tire failure by using
only tires specified for your machine and inflating them
to correct pressures.
IMPORTANT
Chart shown is for tire reference only. Ensure machine
performance by using only tires specified for your ma-
chine and inflating them to correct pressures.
For the even working depth of attachments in the ground, tires
must be inflated to specification. A low tire causes deeper
penetration on one side than the other. Deeper penetration
on one side can cause the machine to side draft. Inflate all
tires to correct pressures.
3 - TRANSPORT OPERATIONS
Pressure
psi kPa
46 317
50 344
58 400
46 317
CAUTION

Check Wheel Hardware

• Re-torque lug nuts after the first 1 hour of use.
bar
• Re-torque lug nuts at 10 hour intervals or (daily). If bolt
3.1
torque is stable, check at 50 hour intervals.
3.4
4.0
3.1
Tighten all wheel lug nuts to specification.
Wheel Lug Nuts
Fig. # 3-17 Table: Wheel Lug Nut Torque
3-7
50
Specification
Torque
350 lb·ft (474 N·m)