Detaching Kwik-Till From Tractor - Norwood Kwik-Till HSD2500 Operator's Manual

Detaching Kwik-Till From Tractor

1. Clear the area of bystanders and remove foreign objects
from the Kwik-Till and working area.
2. Locate the "Hitch Jack Hydraulic Hoses" B attached
to the "Hitch Jack" A .
RED HOSE
GRIP (+)
B
Fig. # 3-42 Locate The Hitch Jack Hydraulic Hoses
3. Make sure that the Hitch Jack hydraulic hose ball valve
is in the "CLOSED" position.
CLOSED
Fig. # 3-43 Make Sure The Ball Valve Is CLOSED (Shown
in the "CLOSED" Position)
3 - TRANSPORT OPERATIONS
(See Fig. # 3-42)
RED HOSE
GRIP (-)
A
(See Fig. # 3-43)
IMPORTANT
Note the polarity on each hose grip, Plus (+) is for pressure
side hydraulic hose, and Minus (-) is for return side hydraulic
hose.
(See Fig. # 3-44)
Hose Grip
(+)
Fig. # 3-44 Determine Hydraulic Hose Is Pressure (+) Or
4. Use a clean cloth or paper towel to clean the couplers on
the ends of the hoses. Also clean the area around the
couplers on the tractor.
5. Connect the "Hitch Jack" hydraulic hoses at this time.
Refer to the following figures.
# 3-46) (See Fig. # 3-47)
Fig. # 3-45 Connect "Hitch Jack" Hydraulic Hoses To
Item Type Color
I Pressure Red
J Return Red
Fig. # 3-46 Table: SCV Identification
3-17
Return (-)
(See Fig. # 3-45) (See Fig.
I
Tractor
SCV Usage
Hitch Jack Pressure (+)
Hitch Jack Return (-)
Hose Grip
(-)
J