4.0 - Working Operations; Operating Safety - Norwood Kwik-Till HSD2500 Operator's Manual

4.0 - WORKING OPERATIONS

1. Read and understand the Operator's Manual and all safety
decals before using.
Park on a level surface, engage park brake, place
2.
transmission in PARK, shut off engine, remove key, and
wait for all moving parts to stop before leaving tractor
cab.
3. Clear the area of bystanders, especially children, before
starting.
4. Be familiar with the machine hazard area. If anyone enters
hazard area, shut down machine immediately. Clear the
area before restarting.
5. Keep hands, feet, hair and clothing away from all moving
and/or rotating parts.
Keep riders off. Riders on the implement are subject
6.
to injury such as being struck by foreign objects and
being thrown off of the machine.
7. Stay away from overhead obstructions and power lines
during operation and transporting. Electrocution can occur
without direct contact.
8. Be sure that area around machine is clear before raising
or lowering machine frame or wings.
It is the responsibility of the owner or operator to read this
manual and to train all other operators before they start work-
ing with the Kwik-Till.
Follow all safety instructions exactly. It is everyone's busi-
ness. By following recommended procedure, a safe working
environment is provided for the operator, bystanders and the
area around the work site.
The design and configuration of this machine includes
safety decals and equipment. Hazard controls and accident
prevention are dependent upon the personnel operating and
maintaining it. Their awareness, concern, prudence and
proper training are crucial.
4 - WORKING OPERATIONS

Operating Safety

9. Do not operate with wings partially folded.
10. Do not operate close to the edge of a ditch, creek, gully,
or steep embankment.
11. Avoid holes, ditches, and obstructions which can cause
tractor, machine, or towed equipment to roll over, especially
on hillsides.
12. Avoid sharp turns on hillsides.
13. Slow down when turning or traveling over rough ground
and when turning on inclines.
14. Always shut off tractor and shift to park or set brakes when
leaving tractor. Remove key when leaving tractor unattend-
ed.
15. Always have tractor stopped on level ground when raising
or lowering wings.
16. Operate machine from tractor seat only.
17. If chemicals are used, follow manufacturer's recommenda-
tions for their handling and storage.
18. Tow machine behind a properly equipped tractor only.
Many features incorporated into this machine are the result of
suggestions made by customers like you. Read this manual
carefully to learn how to operate the machine safely, and to
provide maximum efficiency.
By following the operating instructions, in conjunction with a
good maintenance program, your Kwik-Till will provide many
years of trouble free service.
4-1