Prepare Hydraulic System - Norwood Kwik-Till HSD2500 Operator's Manual

Prepare Hydraulic System

IMPORTANT
Refer to tractor Operator's Manual for specific, detailed
information regarding hydraulic flow.
To prevent damage to relief valves, do not exceed 30
gal/min (113 L/min) on main lift cylinders.
Fig. # 3-6 Adjust The Tractor Hydraulic Flow Settings
1. Check hydraulic oil level. Fill if necessary.
2. Use the chart below as a starting point to set tractor hy-
draulic flow and detent times. Adjust as desired.
Tractor Hydraulic Flow Settings
SCV Function
I Front Wheels
II Rear Roller
III Main Frame Lift
IV Wing Fold
V Hitch Jack
VI Optional Equipment
Fig. # 3-7 Tractor Hydraulic Flow Settings
3 - TRANSPORT OPERATIONS
Detent
Flow
Time
25 gal/min (95 L/min) 7 s
25 gal/min (95 L/min) 7 s
30 gal/min (113 L/min) Float
8 gal/min (30 L/min) Float
5 gal/min (19 L/min) 5 s
15 gal/min (57 L/min) 5 s
3-4