Toc Curve Check - Millipore Milli-Q Direct 8 System User Manual

TOC Curve Check

A TOC Curve Check should be don
When
when TOC values are fluctuating to ensu
valid.
NOTE:
The TOC Curve Check can be starte
and flushing of the Q-Pak pack. The System autom
Curve Check once per day. So, if the TOC Curve Check is not started
manually following the consumables replacem
automatically within the next 24 hours or sooner.
Follow the steps below to perform a TOC Curve Check.
Procedure
Step Action
1 Go to READY Mode.
2 Select Menu.
Press .
3 Select TOC Curve Check.
Press .
e when the Q-Pak pack is replaced o
re that the TOC values displayed are
d ma nually following the replacem
ent, it will be done
- 84 -
r
ent
atically performs a TOC
Diagram
Continued on ext page n