Millipore Milli-Q Direct 8 System User Manual page 52

Description,
Continued
Set Points
Pretreatment
Strainer Frequency
Tap Feed Cond
RO Rejection
RO CL2 Cleaning
Permeate Cond
Tank Refill
Milli-Q Product Res
Milli-Q Product TOC
Millipak
BioPak, EDS-Pak, POD Pak
Diagram 1
Item
- 52 -
Diagram 2
Description
Change set point for controlling the
frequen cy of the message REPLACE
EXTERNAL PRE-TREATMENT.
Change set points for controlling the
frequency of the message EXA
INLET STRAINER.
Change set point controlling the message
TAP FEED CONDUCTIVITY > SP.
Change set point controlling the message
RO REJECTION < SP.
Change set point for controlling the
frequency of the message PERFORM RO
CL2 CLEANING
Change set point controlling the message
PERMEATE C > SP.
Change set point controlling the tank level
where the Milli-Q System starts to refill the
tank.
Change set point controlling the message
MILLI-Q RES < SP, REPLACE Q-PAK.
Change set point controlling the message
MILLI-Q TOC > SP.
Change set point controlling the message
REPLACE POD PAK IN XX DAYS
(where 1  XX  15).
See above.
MINE
Continued on next page